Install Flush Ceiling Light Fixture

Installing a flush ceiling light fixture is a relatively simple task that can be completed in a few steps. By following the instructions below, you can safely and easily install a new light fixture in your home.

Tools and Materials

New light fixture
Screwdriver
Electrical tape
Wire cutters
Voltage tester

Safety Precautions

Before you begin, it is important to take the following safety precautions:

Turn off the power to the circuit that you will be working on at the circuit breaker or fuse box.
Use a voltage tester to make sure that the power is off.
Wear safety glasses and gloves.

Installation Instructions

Remove the old light fixture. If the old fixture is held in place by screws, simply unscrew them and remove the fixture. If the old fixture is held in place by clips, use a screwdriver to pry the clips open and remove the fixture.
Connect the wires from the new light fixture to the wires in the ceiling. Match the black wire to the black wire, the white wire to the white wire, and the green or bare copper wire to the ground wire. Twist the wires together and secure them with electrical tape.
Mount the new light fixture to the ceiling. If the fixture has screws, screw them into the ceiling. If the fixture has clips, snap the clips into place.
Turn on the power to the circuit and test the light fixture.

Troubleshooting

If the light fixture does not work, check the following:

Make sure that the power is on.
Make sure that the wires are connected correctly.
Make sure that the light bulb is working.

Tips

If you are not comfortable working with electricity, it is best to hire a qualified electrician to install the light fixture for you.
When choosing a new light fixture, make sure that it is the right size for the room and that it will provide the amount of light that you need.
If you are installing a light fixture in a bathroom, make sure that it is rated for wet locations.