How To Put In A New Ceiling Light

Replacing a ceiling light is a relatively simple task that can be completed in a few hours. However, there are a few important safety precautions that you should take before you begin. First, make sure that the power to the light is turned off at the circuit breaker or fuse box. Second, wear safety glasses to protect your eyes from flying debris. Finally, if you are not comfortable working with electricity, it is best to hire a qualified electrician to do the job.

Materials You Will Need

New ceiling light
Screwdriver
Wire cutters
Electrical tape
Ladder

Step-by-Step Instructions

Remove the old ceiling light.

To do this, simply unscrew the screws that are holding it in place. Once the screws are removed, carefully pull the light down from the ceiling. 2.

Disconnect the wires from the old ceiling light.

There will be two or three wires connected to the back of the light. Use a screwdriver to loosen the screws that are holding the wires in place, and then carefully pull the wires away from the light. 3.

Connect the wires to the new ceiling light.

The wires on the new light will be color-coded to match the wires on the ceiling. Simply connect the wires of the same color together. Use a screwdriver to tighten the screws that are holding the wires in place. 4.

Mount the new ceiling light to the ceiling.

To do this, simply screw the screws that are holding the light in place. Make sure that the light is securely attached to the ceiling. 5.

Turn on the power to the light.

Once the light is mounted, turn on the power at the circuit breaker or fuse box. The light should now be working properly.

Tips

If you are replacing a fluorescent light, be sure to dispose of the old bulbs properly. Fluorescent bulbs contain mercury, which is a hazardous waste.
If you are not sure how to wire the new ceiling light, consult an electrician.
Be careful not to overtighten the screws that are holding the light in place. This could damage the light or the ceiling.