Ceiling Fan Pull Chain Repair - Ceiling Light Ideas

Ceiling Fan Pull Chain Repair: A Step-by-Step Guide

Ceiling fans are a great way to cool down a room in the summer and circulate air in the winter. However, if the pull chain breaks, it can be frustrating to try to operate the fan. Luckily, repairing a ceiling fan pull chain is a relatively easy task that can be done in a few minutes.

Tools You'll Need

Small screwdriver
Wire cutters
Electrical tape
Replacement pull chain

Step-by-Step Instructions

Turn off the power to the ceiling fan. This can be done by flipping the circuit breaker or removing the fuse that powers the fan.
Remove the canopy. The canopy is the decorative cover that fits over the top of the ceiling fan. It is usually held in place by a few screws.
Locate the pull chain switch. The pull chain switch is a small box that is attached to the ceiling fan motor. It is usually located near the center of the fan.
Remove the pull chain switch. The pull chain switch is usually held in place by a few screws. Once the screws are removed, you can gently pull the switch out of the ceiling fan motor.
Disconnect the wires from the pull chain switch. The wires are usually connected to the pull chain switch with screw terminals. Simply loosen the screws and pull the wires out of the terminals.
Cut the old pull chain off. Use the wire cutters to cut the old pull chain off as close to the pull chain switch as possible.
Attach the new pull chain. Take the new pull chain and thread it through the hole in the pull chain switch. Tie a knot in the end of the pull chain to secure it.
Connect the wires to the pull chain switch. Connect the wires to the pull chain switch by inserting them into the screw terminals and tightening the screws.
Reinstall the pull chain switch. Gently push the pull chain switch back into the ceiling fan motor. Make sure that the wires are not pinched or damaged.
Reinstall the canopy. Put the canopy back over the top of the ceiling fan and secure it with the screws.
Turn on the power to the ceiling fan. Flip the circuit breaker or insert the fuse to turn the power back on to the fan.
Test the pull chain. Pull the pull chain to make sure that the fan is working properly.

Troubleshooting

If you are having trouble repairing the ceiling fan pull chain, here are a few troubleshooting tips:

Make sure that the power to the ceiling fan is turned off.
Make sure that the wires are connected properly to the pull chain switch.
Make sure that the pull chain switch is installed correctly in the ceiling fan motor.
If you are still having problems, you may need to replace the pull chain switch.

Conclusion

Repairing a ceiling fan pull chain is a relatively easy task that can be done in a few minutes. By following these simple steps, you can get your ceiling fan up and running again in no time.

Ceiling Fan Pull Chain Came Out Doityourself Com Community Forums

How To Replace A Paddle Ceiling Fan Pull Chain Switch

Ceiling Fan Light Repair Home Tutor

Ceiling Fan Pull Chain Switch Replacement Ifixit Repair Guide

Ceiling Fan Switch Zing Ear Ze 109 Two Wire Light With Pull Cords For Fans Lamps And Wall Lights Chain Control Replacement On Off 2 Pcs Nickel

How To Fix A Paddle Ceiling Fan Light Switch Today S Homeowner

Ceiling Fan Pull Chain Switch Replacement Ifixit Repair Guide

Pull Chain For Ceiling Fan Ventilator Is Broken Bought A Switch Replacement And Just Need To Connect The Proper Wires It Black Brown Purple Grey Which Do I Use