Casablanca Ceiling Fan And Light Wall Control Instructions

Casablanca Ceiling Fan and Light Wall Control Instructions

Casablanca ceiling fans are known for their stylish designs and high-quality construction. They also come equipped with a variety of features that make them easy to use and control. One of these features is the wall control, which allows you to adjust the fan speed, light brightness, and other settings without having to climb up on a ladder or use a remote control.

Installing a Casablanca ceiling fan and light wall control is a relatively simple process. However, it is important to follow the instructions carefully to ensure that the installation is done safely and correctly.

Tools and Materials

Before you begin, you will need to gather the following tools and materials:

Philips head screwdriver
Wire strippers
Electrical tape
Casablanca ceiling fan and light wall control
Mounting screws (included with the wall control)

Installation Instructions

Once you have gathered all of the necessary tools and materials, you can begin the installation process.

1. Turn off the power to the circuit that will be powering the fan and light. This can be done at the circuit breaker panel. 2. Remove the existing wall switch or outlet cover plate. 3. Disconnect the wires from the existing wall switch or outlet. Be sure to note which wire is connected to which terminal. 4. Connect the wires from the Casablanca ceiling fan and light wall control to the appropriate terminals on the wall box. The black wire from the wall control should be connected to the black wire from the fan, the white wire from the wall control should be connected to the white wire from the fan, and the green or bare copper wire from the wall control should be connected to the ground wire from the fan. 5. Wrap electrical tape around each of the wire connections to insulate them. 6. Tuck the wires neatly into the wall box. 7. Attach the Casablanca ceiling fan and light wall control to the wall box using the provided mounting screws. 8. Turn on the power to the circuit and test the wall control. The fan and light should now be able to be controlled from the wall switch.

Troubleshooting

If you are having any problems installing or using your Casablanca ceiling fan and light wall control, please refer to the troubleshooting tips below:

* The fan or light does not turn on. Check to make sure that the power is turned on to the circuit and that the wall control is properly connected. * The fan or light turns on but does not respond to the wall control. Check to make sure that the wires are connected to the correct terminals on the wall box. * The fan or light makes a humming noise. This is usually caused by a loose wire connection. Check to make sure that all of the wire connections are tight.

Conclusion

Installing a Casablanca ceiling fan and light wall control is a relatively simple process that can be completed in a matter of minutes. By following the instructions carefully, you can ensure that the installation is done safely and correctly.