How Do You Rewire A Ceiling Light Fixture

Rewiring a ceiling light fixture is a relatively simple task that can be completed in a few easy steps. However, it is important to remember that working with electricity can be dangerous, so it is important to take the necessary safety precautions.

Before you begin, you will need to gather the following materials:

- A new light fixture - A screwdriver - Electrical tape - Wire cutters - Wire strippers

Once you have gathered your materials, you can begin the rewiring process.

1. Turn off the power to the light fixture at the circuit breaker or fuse box.

2. Remove the old light fixture by unscrewing the mounting screws and carefully pulling it away from the ceiling.

3. Disconnect the wires from the old light fixture by unscrewing the wire nuts and pulling the wires apart.

4. Connect the wires from the new light fixture to the wires in the ceiling by twisting the wires together and securing them with wire nuts. Make sure that the black wires are connected to each other, the white wires are connected to each other, and the green or bare copper wires are connected to each other.

5. Push the new light fixture back into place and screw in the mounting screws.

6. Turn on the power to the light fixture at the circuit breaker or fuse box and test the light to make sure that it is working properly.