How To Change Pull Chain On Hunter Ceiling Fan

How to Change a Pull Chain on a Hunter Ceiling Fan

A pull chain is a simple mechanism that is used to control the speed and direction of a ceiling fan. If your pull chain breaks or becomes damaged, you will need to replace it. Replacing a pull chain is a relatively easy task that can be completed in a few minutes.

Here are the steps on how to change a pull chain on a Hunter ceiling fan:

1. Turn off the power to the ceiling fan.

This is important for safety reasons. You can turn off the power by flipping the circuit breaker or removing the fuse that controls the fan.

2. Remove the old pull chain.

Locate the small screw that is holding the pull chain in place. Using a screwdriver, remove the screw and then pull the old pull chain out of the fan.

3. Attach the new pull chain.

Insert the new pull chain into the fan and then tighten the screw to hold it in place.

4. Turn on the power to the ceiling fan.

Flip the circuit breaker or insert the fuse to turn the power back on. Test the pull chain to make sure that it is working properly.

Here are some additional tips for changing a pull chain on a Hunter ceiling fan:

If you are not comfortable working with electricity, you can hire a qualified electrician to replace the pull chain for you.
Be sure to purchase the correct replacement pull chain for your Hunter ceiling fan. You can find replacement pull chains at most hardware stores or online.
If you have any questions about how to change a pull chain on a Hunter ceiling fan, please consult the owner's manual or contact Hunter Fan Company for assistance.