How To Change Ceiling Fan Wall Switch

How to Change a Ceiling Fan Wall Switch

Ceiling fans are a great way to keep your home cool and comfortable during the hot summer months. But if the wall switch that controls your ceiling fan is not working properly, it can be a real pain. Fortunately, changing a ceiling fan wall switch is a relatively easy task that can be completed in just a few minutes.

Here are the steps on how to change a ceiling fan wall switch:

Turn off the power to the ceiling fan. You can do this by flipping the circuit breaker that controls the fan or by removing the fuse that powers the fan.
Remove the faceplate from the wall switch. This is usually done by unscrewing the two screws that hold the faceplate in place.
Disconnect the wires from the old switch. There will be two or three wires connected to the switch. Use a screwdriver to loosen the screws that hold the wires in place, and then pull the wires off of the switch.
Connect the wires to the new switch. Connect the wires to the new switch in the same way that they were connected to the old switch. Be sure to tighten the screws that hold the wires in place.
Install the faceplate on the new switch. Line up the faceplate with the switch and screw it into place.
Turn on the power to the ceiling fan. Flip the circuit breaker back on or replace the fuse that you removed earlier.
Test the new switch. Turn the switch on and off to make sure that it is working properly.

If you are not comfortable working with electricity, it is best to hire a qualified electrician to change your ceiling fan wall switch. However, if you are confident in your abilities, changing a ceiling fan wall switch is a relatively easy task that can be completed in just a few minutes.