Attach Light Fitting Plaster Ceiling Rose

Plaster ceiling roses are a popular and elegant way to finish the ceiling around a light fitting. They are available in a wide variety of designs, from simple and understated to highly ornate and decorative. Plaster ceiling roses are relatively easy to install, and with a little care and attention, you can achieve a professional-looking finish.

Here are the essential steps on how to attach a light fitting to a plaster ceiling rose:

Tools and materials you will need:

Plaster ceiling rose
Light fitting
Fixing screws
Drill
Screwdriver
Pencil
Tape measure
Spirit level
Safety glasses

Safety first:

Before you start, it is important to ensure that the electricity supply to the light fitting is turned off. You should also wear safety glasses to protect your eyes from flying debris.

Step 1: Position the ceiling rose:

Place the ceiling rose against the ceiling and mark the position of the fixing holes with a pencil. Use a spirit level to ensure that the ceiling rose is level.

Step 2: Drill the fixing holes:

Use a drill to drill the fixing holes into the ceiling. The size of the drill bit will depend on the size of the fixing screws.

Step 3: Fix the ceiling rose:

Insert the fixing screws into the holes and tighten them using a screwdriver. Ensure that the ceiling rose is securely fixed.

Step 4: Wire the light fitting:

Connect the wires from the light fitting to the wires from the ceiling rose. Make sure that the connections are secure and insulated with electrical tape.

Step 5: Fix the light fitting:

Fix the light fitting to the ceiling rose according to the manufacturer's instructions. Ensure that the light fitting is securely fixed.

Step 6: Turn on the electricity:

Once the light fitting is fixed, turn on the electricity supply and test the light. If the light does not work, check the connections and ensure that the fuse or circuit breaker has not tripped.