How To Adjust A Ceiling Motion Sensor Light

It's rather irritating when your lights switch off abruptly while you are moving around or when they fail to switch on when you enter a room. It could be due to a faulty motion sensor, if that's the case then you have to change the complete unit. But if it's simply a question of incorrect adjustment, then this article with step-by-step guidance will help you to fix the issue.

To adjust the light sensor, you will need a screwdriver or Allen key (depending on the model of your light).

Adjusting the Light Sensitivity

The sensitivity of the light sensor determines how much light is needed to turn off the light. If the sensitivity is set too high, the light will turn off even when there is still plenty of light in the room. If the sensitivity is set too low, the light will stay on even when there is no one in the room. To adjust the light sensitivity, locate the sensitivity adjustment screw on the light fixture. Using a screwdriver or Allen key, turn the screw clockwise to increase the sensitivity or counterclockwise to decrease the sensitivity.

Adjusting the Time Delay

The time delay determines how long the light will stay on after it is triggered. If the time delay is set too short, the light will turn off too quickly. If the time delay is set too long, the light will stay on for too long, even after you have left the room. To adjust the time delay, locate the time delay adjustment screw on the light fixture. Using a screwdriver or Allen key, turn the screw clockwise to increase the time delay or counterclockwise to decrease the time delay.

Adjusting the Sensor Range

The sensor range determines how far away from the light the sensor can detect motion. If the sensor range is set too short, the light will not turn on until you are very close to it. If the sensor range is set too long, the light will turn on even when you are far away from it. To adjust the sensor range, locate the sensor range adjustment screw on the light fixture. Using a screwdriver or Allen key, turn the screw clockwise to increase the sensor range or counterclockwise to decrease the sensor range.

Tips

Here are a few tips for adjusting a ceiling motion sensor light:
- Test the light after each adjustment to make sure that it is working properly.
- If you are not sure how to adjust the light, consult the manufacturer's instructions.
- If you are still having problems with the light, you may need to replace the sensor.

How To Wire A Motion Sensor An Existing Light Rayzeek

Ceiling Mount Occupancy Sensor Installation Instructions

How Motion Sensor Lights Work Everything You Need To Know

Rayzeek Ceiling Mount Motion Sensor 360 110v 265v 1100w Occupancy Switch For 8 12m High Sensitive Light Pc Fireproof 5a Neutral Wire Required Yahoo Ping