How To Change Bulb In Recessed Ceiling Light With Square Cover

Recessed ceiling lights are a common type of lighting fixture found in many homes and businesses. They provide a clean, modern look and can be used to create a variety of lighting effects. However, when the bulb in a recessed ceiling light burns out, it can be difficult to know how to change it. If your recessed ceiling light has a square cover, follow these steps to change the bulb.

Step 1: Turn off the power to the light fixture.

This is important for safety reasons. You can usually turn off the power by flipping the circuit breaker or removing the fuse that supplies power to the light fixture.

Step 2: Remove the cover.

The cover is usually held in place by a few screws. Remove the screws and carefully lift the cover off of the light fixture.

Step 3: Remove the old bulb.

The old bulb is usually held in place by a spring clip. Gently pull down on the spring clip to release the bulb. Then, carefully unscrew the bulb and remove it from the light fixture.

Step 4: Install the new bulb.

Screw the new bulb into the light fixture. Make sure that the bulb is screwed in tightly, but do not overtighten it.

Step 5: Replace the spring clip.

Gently push the spring clip back into place. Make sure that the spring clip is fully seated.

Step 6: Replace the cover.

Carefully lift the cover back onto the light fixture. Then, replace the screws that hold the cover in place.

Step 7: Turn on the power to the light fixture.

Flip the circuit breaker back on or replace the fuse. The new bulb should now be working.

Changing the bulb in a recessed ceiling light with a square cover is a simple task that can be completed in a few minutes. By following these steps, you can safely and easily change the bulb and get your light fixture working again.

How To Open Twist Off The Cover Of Some Really Stupid Awkward Flush Mounted Ceiling Light Dome Fittings Fixtures Replace Change Bulb My Technical Blog