How To Fit Downlights In Ceiling From Below

Fitting downlights in a ceiling from below is a relatively straightforward task that can be completed in a few hours. By following these simple steps, you can ensure that your downlights are installed correctly and safely.

### Step 1: Prepare the hole

The first step is to prepare the hole in the ceiling for the downlight. The size of the hole will vary depending on the size of the downlight you have chosen. Once you have marked the position of the hole, use a sharp knife or a hole saw to cut a hole in the ceiling.

### Step 2: Wire the downlight

Next, you need to wire the downlight. The wires will typically come out of the back of the downlight. Connect the black wire to the live terminal, the white wire to the neutral terminal, and the green or yellow wire to the earth terminal.

### Step 3: Fit the downlight

Once the downlight is wired, you can fit it into the hole in the ceiling. Most downlights will simply push into place, but some may require screws to secure them.

### Step 4: Install the bulb

The final step is to install the bulb in the downlight. The type of bulb you need will depend on the type of downlight you have chosen. Once the bulb is installed, you can turn on the power and enjoy your new downlights.

### Tips

Here are a few tips to help you fit downlights in your ceiling from below:

* Make sure that the hole you cut in the ceiling is the correct size for the downlight. * Be careful not to damage the wires when you are wiring the downlight. * Test the downlight before you install it in the ceiling to make sure that it is working properly. * If you are not comfortable fitting downlights yourself, you can hire an electrician to do it for you.