How To Install A Can Light In An Existing Ceiling

How to Install a Can Light in an Existing Ceiling

Can lights, also known as recessed lights, offer a sleek and modern way to illuminate a room. They are perfect for kitchens, bathrooms, and other areas where you need bright, focused lighting. Installing a can light in an existing ceiling is a relatively simple project that can be completed in a few hours.

Tools and Materials

Can light
Drill
Hole saw
Electrical tape
Wire nuts
Screwdriver
Junction box
Insulation

Step 1: Turn Off the Power

Before you begin, turn off the power to the circuit that you will be working on. This can be done at the circuit breaker panel.

Step 2: Cut the Hole

Use a hole saw to cut a hole in the ceiling for the can light. The hole should be the same size as the outer diameter of the can light.

Step 3: Install the Junction Box

The junction box is what will hold the can light in place. Place the junction box in the hole and secure it with screws. Make sure that the box is level.

Step 4: Wire the Can Light

Connect the wires from the can light to the wires in the junction box. Use electrical tape to insulate the connections. Make sure that the black wires are connected to the black wires, the white wires are connected to the white wires, and the green wires are connected to the green wires.