How To Install A Harbor Breeze Universal Ceiling Fan And Light Wall Control

How to Install a Harbor Breeze Universal Ceiling Fan and Light Wall Control

Installing a Harbor Breeze Universal Ceiling Fan and Light Wall Control can enhance the functionality and ambiance of your home. Follow these detailed instructions to complete the task efficiently and safely:

Materials Required:

Harbor Breeze Universal Ceiling Fan and Light Wall Control
Electrical tester
Phillips-head screwdriver
Electrical tape

Safety Precautions:

Turn off the power supply at the circuit breaker panel before starting the installation.
Wear safety glasses and gloves throughout the process.
Follow all electrical codes and manufacturer's instructions carefully.

Step 1: Prepare the Wall Control

Remove the cover plate from the wall control and separate it into its two parts. Use a screwdriver to loosen the terminal screws and connect the wires from the wall to the corresponding terminals on the wall control, ensuring that the black wires are connected to the black terminals, white wires to white terminals, and green or bare copper wires to the ground terminal.

Step 2: Install the Wall Control

Place the base of the wall control into the electrical box and secure it with the mounting screws. Attach the cover plate and tighten the screws to complete the installation.

Step 3: Connect the Ceiling Fan Receiver

Locate the receiver module attached to the ceiling fan. Remove the cover by unscrewing the screws. Connect the wires from the fan to the corresponding terminals on the receiver, matching black to black, white to white, and green or bare copper to ground. Secure the connections with electrical tape for insulation.

Step 4: Mount the Ceiling Fan

Install the mounting bracket onto the ceiling using the provided screws. Lift the ceiling fan and align it with the mounting bracket. Secure it with the mounting bolts and tighten them until snug.

Step 5: Wire the Ceiling Fan

Connect the wires from the ceiling fan to the corresponding wires in the ceiling electrical box. Ensure that black wires are connected to black wires, white wires to white wires, and the green or bare copper wire to the ground wire. Secure the connections with wire nuts or electrical tape.

Step 6: Attach the Blades

Carefully unpack the ceiling fan blades and insert them into the slots on the fan motor. Secure them with the provided screws.

Step 7: Install the Light Fixture

If your ceiling fan includes a light fixture, assemble it according to the manufacturer's instructions and attach it to the fan motor.

Step 8: Turn On the Power and Test

Restore power at the circuit breaker panel and turn on the wall control. Check if the ceiling fan operates correctly by switching it on and off. Ensure that the light fixture, if installed, also functions properly.

Tips:

Before starting any electrical work, consult with a qualified electrician if you are unsure about any aspect of the installation.
Use a level to ensure that the ceiling fan is mounted evenly.
Do not overload the circuit breaker by connecting too many devices to the same circuit.

Congratulations! You have successfully installed your Harbor Breeze Universal Ceiling Fan and Light Wall Control. Enjoy the convenience and comfort it brings to your home.