How To Install Can Lights In A Suspended Ceiling

How to Install Can Lights in a Suspended Ceiling

Can lights, also known as recessed lighting, are a popular choice for illuminating rooms with high ceilings. They provide a sleek, modern look and can be used to create a variety of lighting effects. Installing can lights in a suspended ceiling is a relatively simple task that can be completed in a few hours.

Before you begin, you will need to gather the following materials:

* Can lights * Junction box * Electrical wire * Wire nuts * Screwdriver * Drill * Jigsaw

Once you have all of your materials, you can begin the installation process.

1. Choose the location of your can lights

The first step is to choose the location of your can lights. You will need to decide how many can lights you want to install and where you want them to be placed. Once you have decided on the location, mark the spots on the ceiling with a pencil.

2. Cut the holes for the can lights

Once you have marked the location of your can lights, you can cut the holes for them. To do this, use a jigsaw to cut a hole that is slightly larger than the diameter of the can lights. Be careful not to cut the holes too large, as this could cause the can lights to fall out of the ceiling.

3. Install the junction box

Once you have cut the holes for the can lights, you need to install the junction box. The junction box is a metal box that will house the electrical wires for the can lights. To install the junction box, follow these steps:

1. Connect the electrical wires to the junction box. 2. Mount the junction box to the ceiling. 3. Secure the junction box with screws.

4. Connect the electrical wires to the can lights

Once the junction box is installed, you can connect the electrical wires to the can lights. To do this, follow these steps:

1. Strip the ends of the electrical wires. 2. Twist the ends of the electrical wires together. 3. Connect the wire nuts to the ends of the electrical wires. 4. Tighten the wire nuts until they are secure.

5. Install the can lights

Once the electrical wires are connected, you can install the can lights. To do this, follow these steps:

1. Insert the can light into the hole in the ceiling. 2. Twist the can light until it is secure. 3. Repeat steps 1 and 2 for each can light.

6. Finish the installation

Once the can lights are installed, you can finish the installation by following these steps:

1. Turn on the power to the can lights. 2. Check to make sure that the can lights are working properly. 3. If the can lights are working properly, you can enjoy your new lighting!

Installing can lights in a suspended ceiling is a relatively simple task that can be completed in a few hours. By following the steps in this article, you can easily install can lights in your home and enjoy the benefits of recessed lighting.