How To Install Canless Recessed Lighting In Existing Ceiling

Canless recessed lighting is a great way to update the look of your home without having to deal with the hassle of installing traditional recessed lighting. Canless lights are installed directly into the ceiling, so there is no need to worry about cutting a hole for a housing or dealing with messy wires. In this guide, we will walk you through the steps on how to install canless recessed lighting in an existing ceiling.

Tools and Materials:

Canless recessed lights
Drill
Drill bit (size of the hole for your lights)
Wire cutters
Electrical tape
Screwdriver
Safety glasses
Gloves

Step 1: Prepare the Ceiling

Before you start installing the lights, you need to prepare the ceiling. This includes clearing away any furniture or obstructions, and making sure that the ceiling is clean and free of dust and debris.

Step 2: Mark the Locations for the Lights

Once the ceiling is prepared, you need to mark the locations for the lights. Use a pencil or chalk to mark the spots where you want to install the lights. Make sure that the lights are evenly spaced and that they are not too close to any walls or fixtures.

Step 3: Drill the Holes

Use a drill to drill holes in the ceiling at the marked locations. The size of the holes will depend on the size of your canless lights. Make sure that the holes are deep enough for the lights to fit snugly.

Step 4: Connect the Wires

Once the holes are drilled, you need to connect the wires to the lights. Cut the wires to the appropriate length, leaving enough slack so that you can easily connect them to the lights. Use electrical tape to connect the wires to the lights, making sure that the positive wire is connected to the positive terminal on the light and the negative wire is connected to the negative terminal.

Step 5: Install the Lights

Once the wires are connected, you can install the lights. Insert the lights into the holes in the ceiling and twist them until they are secure. Make sure that the lights are flush with the ceiling.

Step 6: Turn on the Power

Once the lights are installed, you can turn on the power. The lights should come on immediately. If they do not, check the connections to make sure that they are secure.

Tips for Installing Canless Recessed Lighting

Make sure that you have the right tools and materials before you start.
Be careful when drilling the holes. Make sure that you do not drill into any electrical wires or plumbing pipes.
Connect the wires correctly. Make sure that the positive wire is connected to the positive terminal on the light and the negative wire is connected to the negative terminal.
Install the lights securely. Make sure that the lights are flush with the ceiling.
Turn on the power and test the lights to make sure that they are working properly.

By following these steps, you can easily install canless recessed lighting in your existing ceiling. This is a great way to update the look of your home and add more light to your rooms.