How To Install Kichler Led Flush Mount Ceiling Fixture

Installing a Kichler LED flush mount ceiling fixture is a relatively simple task that can be completed in a few steps. By following these instructions carefully, you can ensure that your new fixture is installed correctly and safely.

Materials you'll need:

Kichler LED flush mount ceiling fixture
Screwdriver
Wire strippers
Electrical tape
Safety glasses

Step 1: Safety first

Before you begin, make sure to turn off the power to the circuit that you will be working on. This can be done by flipping the breaker or removing the fuse. Once the power is off, put on your safety glasses.

Step 2: Remove the old fixture

If there is an existing fixture in place, you will need to remove it before you can install the new one. To do this, simply unscrew the mounting screws and carefully lower the fixture from the ceiling.

Step 3: Prepare the wiring

Once the old fixture is removed, you will need to prepare the wiring for the new one. First, use a wire stripper to remove about 1/2 inch of insulation from the ends of the wires. Then, twist the bare wires together and secure them with electrical tape.

Step 4: Mount the new fixture

Now you are ready to mount the new fixture. First, hold the fixture up to the ceiling and mark the location of the mounting holes. Then, drill pilot holes at the marked locations.

Next, insert the screws into the pilot holes and tighten them until the fixture is securely mounted.

Step 5: Connect the wires

Now you need to connect the wires from the fixture to the wires from the ceiling. To do this, simply match the colors of the wires and twist them together. Then, secure the connections with electrical tape.

Step 6: Turn on the power

Once the wires are connected, you can turn on the power to the circuit. The new fixture should now be working properly.

Tips:

If you are not comfortable working with electricity, it is best to hire a qualified electrician to install the fixture for you.
Make sure that the fixture is securely mounted before you turn on the power.
LED fixtures are very energy-efficient, so you can save money on your energy bills by installing them in your home.