How To Install Portfolio Flush Mount Ceiling Fixture

How to Install a Portfolio Flush Mount Ceiling Fixture

Portfolio flush mount ceiling fixtures are a great way to add light to any room. They are easy to install and can be used in a variety of applications. ### Tools and Materials To install a Portfolio flush mount ceiling fixture, you will need the following tools and materials: * Portfolio flush mount ceiling fixture * Phillips head screwdriver * Electrical tape * Wire cutters/strippers * Drill (if necessary) * Anchors (if necessary) ### Step 1: Turn Off the Power Before you begin, turn off the power to the room where you will be installing the fixture. This can be done by flipping the circuit breaker or removing the fuse. ### Step 2: Remove the Old Fixture If there is an old fixture in place, remove it by unscrewing the screws that hold it in place. Then, disconnect the wires from the fixture. ### Step 3: Mount the Bracket The Portfolio flush mount ceiling fixture comes with a mounting bracket. Attach the bracket to the electrical box in the ceiling using the screws provided. ### Step 4: Connect the Wires Connect the wires from the fixture to the wires in the electrical box. Make sure to connect the black wire from the fixture to the black wire in the box, the white wire from the fixture to the white wire in the box, and the ground wire from the fixture to the ground wire in the box. ### Step 5: Secure the Fixture Once the wires are connected, tuck them into the electrical box and secure the fixture to the bracket. ### Step 6: Turn on the Power Turn on the power to the room and test the fixture. ### Troubleshooting If the fixture does not turn on, check the following: * Make sure that the power is on. * Check that the wires are securely connected. * Make sure that the bulb is good. If you have checked all of these things and the fixture still does not turn on, you may need to contact an electrician.