How To Install Recessed Lighting In Plaster Ceiling

Recessed lighting is a great way to add style and functionality to any room. It can be used to highlight specific areas of a room, create a more ambient light, or simply provide additional illumination. If you're thinking about installing recessed lighting in your home, there are a few things you'll need to do to get started.

Materials You'll Need

Recessed lighting fixtures
Junction box
Romex wire
Wire nuts
Drywall saw
Drill
Screwdriver
Caulk gun
Caulk

Safety First

Before you begin working on any electrical project, it's important to make sure that the power is turned off. You can do this by flipping the breaker that corresponds to the room where you'll be working.

Step 1: Determine the Location of Your Lights

The first step is to determine where you want to install your recessed lights. Once you've decided on the location, use a pencil to mark the spots on the ceiling.

Step 2: Cut the Holes

Once you've marked the spots for your lights, it's time to cut the holes. You can use a drywall saw to do this.

Step 3: Install the Junction Box

Once the holes are cut, you'll need to install the junction box. The junction box will house the electrical connections for your recessed lights.

Step 4: Run the Romex Wire

Once the junction box is installed, you'll need to run the Romex wire from the junction box to each of the recessed lights.

Step 5: Connect the Wires

Once the Romex wire is run, you'll need to connect the wires to the recessed lights. Use wire nuts to do this.

Step 6: Install the Recessed Lights

Once the wires are connected, you can install the recessed lights. To do this, simply insert the light into the hole and twist it until it locks into place.