How to Safely Remove a Flush Mount Ceiling Light Fixture
Replacing or removing a flush mount ceiling light fixture can be a relatively straightforward task, but it does require some caution and attention to detail. If you are not comfortable working with electricity, it is best to hire a qualified electrician for the job. Here are the essential steps for removing a flush mount ceiling light fixture:
1. Safety First
Before you begin, be sure to turn off the power to the light fixture at the breaker panel. This will prevent any risk of electrical shock. Also, clear the area around the light fixture of any furniture or other objects that could get in your way.
2. Remove the Globe and Shade
Most flush mount ceiling light fixtures have a glass globe or shade that needs to be removed before the fixture itself can be taken down. To remove the globe, simply unscrew it from the base of the fixture. If the shade is held in place by screws, remove them and then carefully lift the shade off of the fixture.
3. Disconnect the Wires
Once the globe or shade is removed, you will see the electrical wires that are connected to the fixture. There will be two wires, a black wire and a white wire. Using a pair of wire cutters, carefully cut the wires close to the fixture. Be sure to leave enough wire so that you can reconnect them to the new fixture later.
4. Remove the Mounting Screws
Once the wires are disconnected, you can remove the mounting screws that are holding the fixture in place. There will typically be two or three screws located around the base of the fixture. Once the screws are removed, carefully pull the fixture straight down to detach it from the ceiling.
5. Remove the Old Fixture Box
In some cases, the flush mount ceiling light fixture will be mounted to a fixture box that is attached to the ceiling. If this is the case, you will need to remove the fixture box before you can install the new fixture. To remove the fixture box, simply unscrew the screws that are holding it in place and then pull it straight down from the ceiling.
6. Install the New Fixture
Once the old fixture and fixture box have been removed, you can install the new fixture. To do this, simply connect the wires from the new fixture to the wires from the ceiling, making sure that the black wire is connected to the black wire and the white wire is connected to the white wire. Then, screw the new fixture into the ceiling and secure it with the mounting screws.
7. Install the Globe or Shade
Once the new fixture is in place, you can install the globe or shade. To do this, simply screw the globe or shade onto the base of the fixture.
8. Turn on the Power
Once the new fixture is installed, you can turn on the power at the breaker panel and test the fixture to make sure it is working properly.
Replacing Flush Mount Light With Pendant
How To Remove Flush Mount Ceiling Fixture
Remove These Flush Mount Lights R Howto
How To Change A Ceiling Light Making Maanita
How To Remove A Light Fixture In 6 Steps Apartment Therapy
How To Remove This Light Fixture R Homemaintenance
How To Open Twist Off The Cover Of Some Really Stupid Awkward Flush Mounted Ceiling Light Dome Fittings Fixtures Replace Change Bulb My Technical Blog
Light Fixture Has Rubber Washer Over Plastic Tube Holding It In Place How To Remove R Fixit
Changing A Bulb In Flush Mount Fixture Doityourself Com Community Forums
Commercial Electric 9 In White Oil Rubbed Broe Trims 800 Lumens Led Flush Mount Ceiling Light Fixture With Night Adjustable Cct 56582112 The Home Depot
Related Posts
