How To Repair Pull Cord On Ceiling Fan

How to Repair a Pull Cord on a Ceiling Fan

If the pull cord on your ceiling fan has broken, don't despair. It's a relatively easy repair that you can do yourself with a few simple tools.

Here are the steps on how to repair a pull cord on a ceiling fan:

1. Safety first

Before you start, make sure to turn off the power to the ceiling fan at the circuit breaker. This will prevent you from getting shocked while you're working.

2. Remove the light kit

Most ceiling fans have a light kit that is attached to the bottom of the fan. To remove the light kit, simply unscrew the screws that are holding it in place.

3. Identify the pull cord switch

Once the light kit is removed, you will see the pull cord switch. It is usually a small, white or black plastic box with two wires attached to it.

4. Disconnect the wires

Use a screwdriver to loosen the screws that are holding the wires to the pull cord switch. Once the screws are loose, you can pull the wires off of the switch.

5. Replace the pull cord switch

Take the new pull cord switch and connect the wires to it. Make sure that the wires are connected to the correct terminals. The black wire should be connected to the terminal that is marked with a black screw, and the white wire should be connected to the terminal that is marked with a white screw.

6. Tighten the screws

Once the wires are connected, tighten the screws that are holding them in place. Make sure that the screws are tight enough so that the wires will not come loose.

7. Reinstall the light kit

Once the pull cord switch is replaced, you can reinstall the light kit. Simply screw the light kit back into place.

8. Test the pull cord

Turn the power back on to the ceiling fan and test the pull cord. The pull cord should now work properly.

Additional tips

If you are not comfortable working with electricity, it is best to call a qualified electrician to repair the pull cord on your ceiling fan.
Make sure to use the correct size screws when you are replacing the pull cord switch. If the screws are too small, they will not hold the wires in place and the pull cord will not work properly.
If the pull cord is frayed or damaged, it is best to replace it with a new one.

Ceiling Fan Pull Chain Came Out Doityourself Com Community Forums

The Pull Chain On My Ceiling Light Pulled Free Entirely From Inside Base Is This Fixable R Howto

Broken Pull Cord For Ceiling Fan Doityourself Com Community Forums

Ceiling Fan Pull Chain Switch Replacement Ifixit Repair Guide

Pull Chain For Ceiling Fan Ventilator Is Broken Bought A Switch Replacement And Just Need To Connect The Proper Wires It Black Brown Purple Grey Which Do I Use