How To Wire A Keyless Ceiling Lampholder

A keyless ceiling lampholder is a type of lampholder that does not require a key to turn on or off. It is typically used in ceiling fixtures and is often found in homes and businesses. Wiring a keyless ceiling lampholder is a relatively simple process that can be completed in a few steps.

Materials You'll Need

Keyless ceiling lampholder
Wire strippers
Electrical tape
Screwdriver

Steps

Turn off the power to the circuit that you will be working on. This is important for safety reasons.
Remove the old lampholder. If there is an existing lampholder, you will need to remove it before you can install the new one. To do this, simply unscrew the lampholder from the ceiling.
Strip the wires. Once the old lampholder is removed, you will need to strip the wires that are connected to it. To do this, use wire strippers to remove about 1/2 inch of insulation from the end of each wire.
Connect the wires to the lampholder. The wires from the ceiling will need to be connected to the terminals on the lampholder. The black wire should be connected to the terminal marked "L," and the white wire should be connected to the terminal marked "N." The ground wire (usually green or bare copper) should be connected to the terminal marked with the ground symbol.
Secure the wires. Once the wires are connected, you will need to secure them in place. To do this, use electrical tape to wrap around the wires and the terminals.
Install the lampholder. Once the wires are secured, you can install the lampholder in the ceiling. To do this, simply screw the lampholder into the ceiling.
Turn on the power and test the lampholder. Once the lampholder is installed, you can turn on the power and test it to make sure that it is working properly.

Wiring a keyless ceiling lampholder is a simple process that can be completed in a few steps. By following these instructions, you can safely and easily install a new lampholder in your home or business.