Installing Can Lights In Plaster Ceiling

Installing can lights in a plaster ceiling is a great way to add light and style to your home. However, it is important to follow the correct steps to ensure a safe and professional installation. Here are the essential aspects of installing can lights in a plaster ceiling:

1. Safety First

Before you begin, it is important to turn off the power to the circuit that you will be working on. You should also wear safety glasses and gloves to protect yourself from dust and debris.

2. Mark the Location of the Can Lights

Use a pencil to mark the location of each can light. Make sure that the lights are spaced evenly and that they are not too close to any walls or obstacles.

3. Cut the Holes for the Can Lights

Use a hole saw to cut the holes for the can lights. The holes should be the same size as the diameter of the can lights.

4. Install the Can Lights

Insert the can lights into the holes and secure them with the provided screws. Make sure that the can lights are level and that they are flush with the ceiling.

5. Connect the Wires

Connect the wires from the can lights to the wires from the circuit. Make sure that the connections are tight and that they are insulated with electrical tape.

6. Turn on the Power

Once the wires are connected, you can turn on the power to the circuit. The can lights should now be working.

7. Trim the Holes

Use a utility knife to trim the holes around the can lights. The trim should be flush with the ceiling and it should cover the edges of the holes.

8. Paint the Ceiling

If you are painting the ceiling, be sure to paint over the trim around the can lights. This will help to blend the lights into the ceiling and create a professional look.

By following these steps, you can safely and easily install can lights in a plaster ceiling. These lights will add light and style to your home for years to come.