Replace Pull String On Ceiling Fan

Replace the Pull String on a Ceiling Fan

Ceiling fans are a great way to cool down a room in the summer and circulate air in the winter. But if the pull string breaks, it can be frustrating to try to operate the fan. Fortunately, replacing a pull string is a relatively easy task that can be completed in just a few minutes.

Tools and Materials

Replacement pull string
Screwdriver
Needle-nose pliers

Steps

Turn off the power to the ceiling fan.

This can be done by flipping the circuit breaker or removing the fuse that powers the fan. 2.

Remove the fan canopy.

The canopy is the decorative cover that is located at the top of the fan. It is usually held in place by a few screws. 3.

Locate the pull string assembly.

The pull string assembly is located inside the canopy. It is usually made of plastic and has a small metal loop at the end. 4.

Remove the old pull string.

Use the needle-nose pliers to grasp the metal loop at the end of the old pull string. Pull the string straight down to remove it from the assembly. 5.

Install the new pull string.

Insert the new pull string into the assembly. Pull the string up until the metal loop is flush with the assembly. 6.

Reattach the canopy.

Replace the canopy over the fan and secure it with the screws. 7.

Turn on the power to the ceiling fan.

Test the pull string to make sure it is working properly.

Tips

If you are having trouble removing the old pull string, you can try using a small screwdriver to pry it out.
When installing the new pull string, make sure that it is not too tight or too loose. It should be able to move freely but should not sag.
If you are not comfortable replacing the pull string yourself, you can call an electrician for assistance.

Conclusion

Replacing the pull string on a ceiling fan is a simple and inexpensive repair that can be completed in just a few minutes. By following the steps outlined above, you can restore your fan to working order and enjoy a cool and comfortable breeze.