Replacing Ceiling Fan Extra Red Wire

Replacing a ceiling fan can be a daunting task, especially if you're not familiar with electrical wiring. But don't worry, we're here to help. In this article, we'll walk you through the process of replacing a ceiling fan's extra red wire, one of the most important steps in the installation process.

What is the Extra Red Wire?

The extra red wire is a wire that is typically found in ceiling fan installations. It is used to connect the fan's light kit to the power supply. Without the extra red wire, the fan's light would not be able to function.

How to Replace the Extra Red Wire

To replace the extra red wire, you will need the following tools:

A Phillips head screwdriver
A wire cutter
A wire stripper
Electrical tape
A new extra red wire

Once you have gathered your tools, follow these steps to replace the extra red wire:

Turn off the power to the ceiling fan at the circuit breaker.

Remove the ceiling fan's canopy.

To do this, simply unscrew the screws that are holding it in place. 3.

Locate the extra red wire.

It will be connected to the fan's light kit. 4.

Cut the extra red wire.

Cut the wire close to the light kit, leaving about 6 inches of wire on each side. 5.

Strip the insulation off the ends of the extra red wire.

Strip about 1/2 inch of insulation off each end of the wire. 6.

Connect the new extra red wire.

Connect one end of the new extra red wire to the light kit and the other end to the power supply. 7.

Wrap electrical tape around the connections.

Wrap the electrical tape around the connections to secure them. 8.

Reinstall the ceiling fan's canopy.

Screw the canopy back into place. 9.

Turn on the power to the ceiling fan at the circuit breaker.

Tips

Here are a few tips to help you replace the extra red wire:

Make sure that the power to the ceiling fan is turned off before you begin working.
Use a wire cutter to cut the extra red wire. Do not use scissors, as they can damage the wire.
Strip the insulation off the ends of the extra red wire using a wire stripper. Do not use your teeth, as this can damage the wire.
Wrap electrical tape around the connections to secure them. Make sure that the tape is wrapped tightly, as loose tape can cause the connections to come loose.

Conclusion

Replacing a ceiling fan's extra red wire is a relatively simple task that can be completed in just a few minutes. By following the steps outlined in this article, you can safely and easily replace the extra red wire and get your ceiling fan working again.